ocrobot:alpha:1602:tutorial09
显示A到Z
这个例程显示了如何在OCROBOT ALPHA 1602 LCD显示屏上显示A到Z。
硬件
搭建电路
- ALPHA 1602 LCD模块插入并行扩展版1号槽位。
- ALPHA MEGA328-U模块插入并行扩展板2号槽位。
- USB线连接计算机与ALPHA MEGA328-U。
代码
const int numRows = 2; const int numCols = 16; #include <Wire.h> #include <LiquidCrystal_I2C.h> LiquidCrystal_I2C lcd(0x20,numCols,numRows); void setup() { lcd.init(); lcd.backlight(); } void loop() { // 'a' 到 'z'循环: for (int thisLetter = 'a'; thisLetter <= 'z'; thisLetter++) { // 行循环: for (int thisRow = 0; thisRow < numRows; thisRow++) { // 列循环: for (int thisCol = 0; thisCol < numCols; thisCol++) { // 设置光标位置: lcd.setCursor(thisCol, thisRow); // 显示字符: lcd.write(thisLetter); delay(200); } } } }
ocrobot/alpha/1602/tutorial09.txt · 最后更改: 2023/06/07 04:23 由 127.0.0.1