ocrobot:alpha:1602:tutorial10
显示Z到A
这个例程显示了如何在OCROBOT ALPHA 1602 LCD显示屏上显示Z到A。
硬件
搭建电路
- ALPHA 1602 LCD模块插入并行扩展版1号槽位。
- ALPHA MEGA328-U模块插入并行扩展板2号槽位。
- USB线连接计算机与ALPHA MEGA328-U。
代码
#include <Wire.h> #include <LiquidCrystal_I2C.h> LiquidCrystal_I2C lcd(0x20,16,2); int thisChar = 'a'; void setup() { lcd.init(); lcd.backlight(); lcd.cursor(); } void loop() { // 在'm'改变方向: if (thisChar == 'm') { // 向右 lcd.rightToLeft(); } // 在 's'返回: if (thisChar == 's') { // 向左 lcd.leftToRight(); } // 在'z'重来: if (thisChar > 'z') { // 返回 (0,0): lcd.home(); // 在 0 开始 thisChar = 'a'; } // 显示字符 lcd.write(thisChar); //等一秒: delay(1000); // 增加字符: thisChar++; }
ocrobot/alpha/1602/tutorial10.txt · 最后更改: 2023/06/07 04:23 由 127.0.0.1